Meanwell Products

HomeMeanwell ProductsLED Power Supply80W Single Output Switch Mode Power Supply IP64 rated

HLN-80H-A Series - 80W Single Output Switch Mode Power Supply IP64 rated



HLN-80H series are 60~80W LED power supplies featuring a universal AC input up to 305Vac and includes the capability to adjust the OCP point through the output cable, or internal potentiometer. Varying from 12V to 54V, these power supplies are fully isolated in a plastic case with an IP64 rating ensuring installation in dry and damp conditions for external applications. This allows the HLN-80H series to operate in a case temperature -40˚C ~ + 50˚C under free air convection and is equipped with a PFC function for various performance protections; short circuit, over current, over voltage and over temperature. Suitable for LED lighting and moving sign applications. Each HLN-80H power supply comes with a 3 year warranty and is compliant to all Safety and EMC standards for LED Lighting.

Additional information



  • Universal AC input / Full range (up to 305VAC)
  • Built-in active PFC function
  • Protections: Short circuit / Overload / Over voltage / Over temperature
  • Cooling by free air convection
  • OCP point adjustable through output cable or internal potential meter
  • Fully isolated plastic caseIP64 design for indoor or outdoor installations
  • Three in one dimming function (1~10Vdc or PWM signal or resistor)
  • Suitable for LED lighting and moving sign applications
  • Compliance to worldwide safety regulations for lighting
  • Suitable for dry / damp locations
  • Output voltage and constant current level can be adjusted through internal potentional meter
Voltage Range 90 ~ 305VAC 127 ~ 431VDC
Frequency Range 47 ~ 63Hz
Input Current 0.85A/ 115VAC 0.425A/ 230VAC 0.4A/ 277VAC
Inrush Current COLD START 70A/230VAC
Leakage Current <0.75mA/ 277VAC
Setup, Rise Time 2000ms, 80ms / 115VAC at full load; 1000ms,80ms/230VAC at full load
Hold Up Time 16msat full load 230VAC /115VAC
Over Current Protection 95 ~ 108%
Over Temperature Protection 100°C±10°C
Working Temperature -40 ~ +40°C@ full load; +50°C@ 60% load
Temperature Coefficient ±0.03%/°C(0 ~ 40°C)
Vibration 10 ~ 500Hz, 2G 12min./1cycle, period for 72min. each along X,Y, Z axes
Safety Standards EN61347-1, EN61347-2-13 independent, IP64 approved ; Design refer to UL60950-1,TUV EN60950-1
EMC Compliance toEN55015 Class B; EN61000-3-2 Class C (60% load, 12V model) ; EN61000-3-3
EN61000-4-2,3,4,5,6,8,11; ENV50204, EN61547, EN55024, heavy industry level (surge 4KV), criteriaA
MTBF 356.4Khrs min. MIL-HDBK-217F (25°C)
  • CB
  • CE
  • PFC