Meanwell Products

HomeMeanwell ProductsLED Power Supply30W Single Output UL1310 Class 2 IP64 LED Power Supply

PLN-30 Series - 30W Single Output UL1310 Class 2 IP64 LED Power Supply

Email
SKU: PLN-30 Series Category:

Description

These limited power sources comply with UL1310 class 2 that under any situation the output power will remain less than 100VA or 5A. This will significantly reduce the hazardous condition exposed to the technicians who execute the construction or maintenance of the LED lighting system. The IP64 enclosure design can protect the electronic components against dust and moisture and makes them suitable for use at indoor or outdoor locations. Thanks to the simplified single stage PFC topology, the required high power factor, as well as the class C harmonic level for the lighting industry, can be achieved economically. Efficiency’s of PLN-30 series are as high as 86% and hence can operate between -30°C ~ +50°C by only free air convection inside the fully covered plastic enclosure. Standard functions include short circuit, over load, over voltage, and over temperature protections. The adjustable output voltage and current level enables the fine tuning of the PSU to comply with the requirement of LED characteristics.

Additional information

Standards

CCSAUS, CE, PFC, TUV

Outputs

C.C. and C.V.

IP rating

IP64

  • Universal AC input, full range
  • Fully isolated plastic case
  • IP64 design for indoor or outdoor installations
  • UL1310 Class 2 power unit
  • Built in constant current limiting circuit with adjustable over current protection level
  • Short circuit, over load, over voltage and over temperature protections
  • Built in Active PFC function
  • Cooling by free air convection
  • 100% full load burn-in test
  • High reliability
  • small scale moving signs
  • backlighting
  • LED-based decorative lighting
  • LED-based architectural lighting
  • LED stage and theatre lighting
  • LED electronic displays
Input Voltage90 ~ 264Vac 127 ~ 370Vdc
Input Frequency47 ~ 63Hz
Power FactorPF>0.9 at 75 ~ 100% load, 115Vac / 230Vac
Input Current0.4A/115Vac 0.2A/230Vac
Inrush Current40A/230Vac
Leakage Current0.5mA/240Vac
Output Voltage Adjustment Range-5% ~ 10%. Can be adjusted by internal potential meter SVR1
Current Adjustment Range3% ~ -25%. Can be adjusted by internal potential meter SVR2
Output Voltage Tolerance±10%
Line Regulation±3.0%
Load Regulation±5.0%
Set Up Time1500ms / 230VAC 3000ms / 115VAC at full load
Over Current Protection100 ~ 110%
Constant current limiting, recovers automatically after fault condition is removed
Short Circuit ProtectionHiccup mode, recovers automatically after fault condition is removed
Over Voltage ProtectionShut down o/p voltage, re-power on to recover
Over Temperature Protection95°C ±5°C (TSW1)
Shut down o/p voltage, re-power on to recover
Working Temperature-30°C ~ +50°C (Refer to output load derating curve)
Working Humidity20 ~ 90% RH non-condensing
Storage Temperature, Humidity-40°C ~ +80°C, 10 ~ 95% RH
Temperature Coefficient±0.06%/°C (0°C ~ 50°C)
Vibration10 ~ 500Hz, 2G 12min./1 cycle, period for 72min. each along X,Y, Z axes
Withstand VoltageI/P-O/P:3.75KVAC
Isolation ResistanceI/P-O/P:100M Ohms/500VDC 25°C 70%RH
Safety StandardsTUV EN61347-1, EN61347-2-13, CAN/CSAC22.2 No. 223-M91(except for 48V), IP64 approved
EMCCompliance to EN55015; EN61000-3-2 Class C (pin25W), Class D (>70% load) ; EN61000-3-3;
EN61000-4-2,3,4,5,6,8,11; ENV50204, EN55024, EN61547, Light industry level, criteria A
MTBF621.4Khrs min. MIL-HDBK-217F (25°C)
Dimensions145 x 47 x 30mm
  • CCSAUS
  • CE
  • PFC
  • TUV