MEAN WELL Products
PLN-60 Series - PLN-60 Series 60W Single Output IP64 Class 2 LED Power Supply
60W Single Output Class 2 Power Unit
Description
A 60W led lighting power supply with universal AC input and active PFC function. These limited power sources comply with UL1310 Class II that under any situation the output power will be less than 100VA to 5A. The high IP64 level design can protect the electronic components from dust and moisture damage and making it useable for indoor and outdoor applications. Thanks to the simplified single stage PFC topology the required high power factor for the lighting industry can be achieved economically. Efficiencies are as high as 88% and hence can operate between -30°C and +70°C using only free air convection.
Additional information
| Standards | CSUUS |
|---|---|
| Type | AC/DC,Constant Current,LED Driver |
| Range Power | |
| Outputs | Single |
| Input Voltage | 90 ~ 264Vac 127 ~ 370Vdc |
| Input Frequency | 47 ~ 63Hz |
| Power Factor | PF>0.9 at 75 ~ 100% load, 115Vac / 230Vac |
| Input Current | 0.8A/115Vac 0.4A/230Vac |
| Inrush Current | 40A/230Vac |
| Leakage Current | 0.75mA/240Vac |
| O/P Current Adjustment Range | 3% ~ -25%. Can be adjusted by internal potential meter SVR2 |
| O/P Voltage Adjustment Range | Can be adjusted by internal potential meter SVR1 |
| Voltage Tolerance | ±10% |
| Line Regulation | ±3.0% |
| Load Regulation | ±5.0% |
| Set Up Time | 1500ms/ 230Vac 3000ms/115Vac at full load |
| Over Current Protection | 110% (max); 95 ~ 110% on 12V model |
| Constant current limiting, recovers automatically after fault condition is removed | |
| Short Circuit Protection | Hiccup mode, recovers automatically after fault condition is removed. |
| Over Voltage Protection | Shut down o/p voltage, re-power on to recover |
| Over Temperature Protection | 95°C ±10°C (TSW1) Detect on heatsink of power transistor |
| Shut down o/p voltage, recovers automatically after temperature goes down | |
| Working Temperature | -30°C ~ +50°C (Refer to output load derating curve) |
| Working Humidity | 20 ~ 90% RH non-condensing |
| Storage Temperature, Humidity | -40°C ~ +80°C 10 ~ 95% RH |
| Temperature Coefficient | ±0.03%/°C (0 ~ 50°C) |
| Vibration | 10 ~ 500Hz, 2G 12min./1cycle, period for 72min. each along X, Y, Z axes |
| Withstand Voltage | I/P-O/P:3.75KVAC I/P-FG:1.88KVAC O/P-FG:0.5KVAC |
| Isolation Resistance | I/P-O/P:100M Ohms / 500VDC / 25°C/ 70% RH |
| Safety Standards | UL1310 Class 2, TUV EN61347-1, EN61347-2-13, CAN/CSAC22.2 No. 223-M91(except for 48V), IP64 approved |
| EMC | Compliance to EN55015, EN55022 (CISPR22) Class B; EN61000-3-2,-3 |
| EN61000-4-2,3,4,5,6,8,11; ENV50204, EN55024, EN61547, Light industry level, Criteria A | |
| MTBF | 497.8Khrs min. MIL-HDBK-217F (25°C) |
| Dimensions | 181 x 61.5 x 35mm |
- CSUUS
