Meanwell Products

HomeMeanwell ProductsLED Power Supply30W AC/DC Single Output Class 2 LED Lighting Power Supply

PLC-30 Series - 30W AC/DC Single Output Class 2 LED Lighting Power Supply

Email

Description

PLC-30 Series are 30W LED Lighting Power Supplies based on earlier PLN models but with a redesign to change the terminal block style of the Input/Output connections to be more flexible when wiring and the addition of two access points, with rubber stoppers, to allow the output voltage and current to be adjusted without the need to remove the covers.

Additional information

Manufacturer

Mean Well Enterprises Ltd.

Standards

CE, PFC, TUV

Outputs

C.C. and C.V.

IP rating

None

  • Universal AC input / Full range
  • Fully isolated plastic case with terminal block style I/O
  • Built-in constant current limiting circuit
  • Adjustable output voltage and current level
  • Short circuit, over load, over voltage, over temperature protections
  • Built-in active PFC function, comply with EN61000-3-2 class C (Pin>25W)
  • Cooling by free air convection
  • 100% full load burn-in test
  • High reliability
  • Suitable for LED lighting and moving sign applications
  • Compliance to worldwide safety regulations for lighting
  • Moving signs
  • Backlighting
  • LED-based decorative/architectural lighting
  • LED stage and theater lighting
  • LED electronic displays
Input Voltage90 ~ 264VAC 127 ~ 370VDC
Input Frequency47 ~ 63Hz
Power FactorPF>0.9 at 75 ~ 100% load, 115VAC / 230VAC
Input Current0.4A/115VAC 0.2A/230VAC
Inrush Current40A/230VAC
Leakage Current<0.5mA / 240VAC
Voltage Tolerance±10%
Line Regulation±3.0%
Load Regulation±5.0%
Set Up Time1500ms / 230VAC 300ms / 115VAC at full load
Over Current Protection100 ~ 110%
Constant current limiting, recovers automatically after fault condition is removed
Short Circuit ProtectionHiccup mode, recovers automatically after fault condition is removed.
Over Voltage ProtectionShut down o/p voltage, re-power on to recover
Over Temperature Protection95°C ±10°C (TSW1)
Shut down o/p voltage, re-power on to recover
Working Temperature-30°C ~ +50°C (Refer to output load derating curve)
Working Humidity20 ~ 95% RH non-condensing
Storage Temperature, Humidity-40°C ~ +80°C, 10 ~ 95% RH
Temperature Coefficient±0.06%/°C (0 ~ 50°C)
Vibration10 ~ 500Hz, 2G 12min./1cycle, period for 72min. each along X, Y, Z axes
Withstand VoltageI/P-O/P:3.75KVAC
Isolation ResistanceI/P-O/P:100M Ohms / 500VDC / 25°C/ 70% RH
Safety StandardsTUV EN61347-1, EN61347-2-13 approved
EMCCompliance to EN55015; EN61000-3-2 Class C (Pin>25W), Class D (>70% load) ; EN61000-3-3;
EN61000-4-2,3,4,5,6,8,11; ENV50204, EN55024, EN61547, light industry level, criteria A
MTBF625.5Khrs min. MIL-HDBK-217F (25°C)
Dimensions160 x 46 x 30mm
  • CE
  • PFC
  • TUV