MEAN WELL Products
PLC-100 Series - PLC-100 Series 100W AC/DC Single Output Class 2 LED Power Supply
100W AC/DC Single Output Class 2 LED Lighting Power Supply
Description
PLC-100 Series are 100W LED Lighting Power Supplies based on earlier PLN models but with a redesign to change the terminal block style of the Input/Output connections to be more flexible when wiring and the addition of two access points, with rubber stoppers, to allow the output voltage and current to be adjusted without the need to remove the covers.
Additional information
| Standards | CSUUS |
|---|---|
| Type | AC/DC,Constant Current,Constant Voltage,LED Driver |
| Range Power | |
| Outputs | Single |
| Input Voltage | 90 ~ 264VAC 127 ~ 370VDC |
| Input Frequency | 47 ~ 63Hz |
| Power Factor | PF>0.95/230VAC PF>0.95/115VAC at full load PF >0.9 at 75 ~ 100% load |
| Input Current | 12V:0.8A/115VAC 0.4A/230VAC15V:0.9A/115VAC 0.45A/230VAC |
| 20V ~ 48V:1.1A/115VAC 0.55A/230VAC | |
| Inrush Current | 40A/230VAC cold start |
| Leakage Current | <0.75mA / 240VAC |
| Line Regulation | ±1.0% |
| Load Regulation | ±2.0% |
| Set Up, Rise Time | 1200ms, 80ms/230VAC 1200ms, 80ms/115VAC at full load |
| Hold Up Time | 60ms/230VAC 30ms/115VAC at full load |
| Over Current Protection | 95 ~ 102% |
| Constant current limiting, recovers automatically after fault condition is removed | |
| Over Voltage Protection | Shut down and latch off o/p voltage, re-power on to recover |
| Over Temperature Protection | 90°C ±10°C (RTH2) |
| Shut down o/p voltage, re-power on to recover | |
| Working Temperature | -30°C ~ +50°C (Refer to output load derating curve) |
| Working Humidity | 20 ~ 95% RH non-condensing |
| Storage Temperature, Humidity | -40°C ~ +80°C, 10 ~ 95% RH |
| Temperature Coefficient | ±0.03%/°C (0 ~ 50°C) |
| Vibration | 10 ~ 500Hz, 2G 12min./1cycle, period for 72min. each along X, Y, Z axes |
| Withstand Voltage | I/P-O/P:3.75KVAC I/P-FG:1.88KVAC O/P-FG:0.5KVAC |
| Isolation Resistance | I/P-O/P, I/P-FG, O/P-FG:100M Ohms / 500VDC / 25°C/ 70% RH |
| Safety Standards | UL1310 Class 2, EN61347-1, EN61347-2-13 independent,UL60950-1, TUV EN60950-1, |
| UL879 ( listed in ULSign Components Manual (SAM) )CAN/CSAC22.2 No. 223-M91(except for 48V) approved | |
| EMC | Compliance to EN55015, EN55022 (CISPR22) Class B; EN61000-3-2,-3, Class C (70% load); EN61000-3-3; |
| EN61000-4-2,3,4,5,6,8,11; ENV50204, EN61547, EN55024, light industry level, (surge 4KV), criteria A | |
| MTBF | 297.9Khrs min. MIL-HDBK-217F (25°C) |
| Dimensions | 200.5 x 70.5 x 35mm |
- CSUUS
